Lanzhou Seemine Keli Advanced Material Co.,Ltd

PRODUCTS CENTER

Eritrea Shape memory alloy ingot

Ogg:0.03kg-30kg Niti,NiTiNb,NiTiCu,NiTiFe, NiTiCo,NiTiV,NiTiCr,NiTiZr,NiTiHf, NiTiPd,NiTiHfZr,NiCuTiHf The temperature is 50 degrees to 95 degrees.

Category:

Eritreamaterial

Phone:400-888-8888

Inquire

Product Description

◆ Chemical composition

element	mass fraction（%）
element	medical	civil
nickel (Ni)	54.5~57.0	54.5~57.0
carbon（C）	≤0.040	≤0.070
cobalt（Co）	≤0.050	≤0.050
copper（Cu）	≤0.010	≤0.010
chromium（Cr）	≤0.010	≤0.010
hydrogen（H）	≤0.005	≤0.005
Iron（Fe）	≤0.050	≤0.050
niobium（Nb）	≤0.025	≤0.025
nitrogen（N）	≤0.005	≤0.005
oxygen（O）	≤0.040	≤0.050
titanium（Ti）	allowance	allowance

◆ Metallurgical structure

SEEMIME KELI

ASTM f2063 stipulates that the size of inclusions or voids must be less than 39 for alloys with a fully annealed phase transition temperature as less than or equal to 30 ℃ μ m. And the area fraction is less than 2.8%. Alloys with phase transformation temperature as greater than 30 ℃ in fully annealed state shall have the maximum inclusion size and area fraction agreed by the buyer and the supplier.

SEEMIME KELI

The nickel titanium based shape memory alloy of the company adopts VIM in high vacuum(P≤1.0×10-3pa).The electromagnetic stirring of the molten pool makes the NiTi based alloy have good composition uniformity.The microstructure of the ingot section is shown in the figure:

The as cast structure of NiTi base alloy is a typical solidification structure.From the surface of the ingot to the center of the ingot,there are surface fine crystal region,columnar crystal region and central equiaxed crystal region.

SEEMIME KELI

The typical b2-b19 'martensitic transformation can be observed by DSC after the ingot is treated by water cooling at 900 ℃ for 1H.

EritreaNitico superelastic wire

Eritrea记忆合金棒材

: next page

FUSION, CREATING THE FUTURE

CONDENSATION AND FUSION,CREATING A SMART FUTURE

+86 931-5517095 / +86 931-4616088 / +86 18893471513

email：keli@seemine.com.cn

address：Building 1, Lanxin Road 1, Lanzhou East Science and Technology City, Lanzhou City, Gansu Province

Group official website

The ownership of all contents contained in this website (including but not limited to: text, graphics, pictures, video and sound content, LOGO LOGO, layout design, column catalog and name, content classification) belongs to Lanzhou Xmai Keli New Material Co., LTD., and any unauthorized reprint or use shall bear the copyright and other legal liabilities

Eritrea material

Eritrea Memory alloy products

Eritrea service

Eritrea Shape memory alloy ingot